View of Pilsen, Czechia

Czechia · 10 kWp reference system

Pilsen solar forecast and PV yield

Photo: Náměstí Republiky - panoramio (6).jpg : Mister No (Panoramio) Plzeň Cathedral of Saint Bartholomew-0146.jpg : Isiwal Rathaus-pilsen.jpg : Matthias Süß Pilseno, la Granda Sinagogo, 30.jpeg : Aisano Plzeň TechMania hala 2.jpg : VitVit Pomnik kopeckeho.jpg : Pablo.czech Nové divadlo v Plzni 03.JPG : Hadonos Plzeň, brána, čelní pohled (2).jpg : Jan Polák Pilsen-Water Tower.jpg : Tamorlan,CC BY-SA 4.0. Cropped, resized and converted to WebP by GridPassport.

Forecast target: . Any “tomorrow” label on this page refers to this dated target.

Tomorrow's forecast
39.3 kWh
10 kWp reference system
Typical annual output
10,674 kWh
10 kWp reference system
Typical specific yield
1,067 kWh/kWp
Per year

Tuesday, September 1, 2026

About 39.3 kWh tomorrow

For a standard 10 kWp south-facing system in Pilsen, GridPassport estimates 39.3 kWh on Tuesday, September 1, 2026, with a likely range of 26.2-50.6 kWh. The strongest production window is expected at 12:00-16:00 local time.

Updated Aug 31, 2026, 01:01 AM GMT+2 · fresh snapshot
Likely range
26.2-50.6 kWh
Strongest window
12:00-16:00
Confidence
medium
Forecast my solar output

How to read and use the data

Pilsen solar forecast: daily weather versus long-term PV yield

The daily and annual figures answer different questions. Use the dated forecast to plan tomorrow, and the PVGIS specific yield to compare locations or estimate a typical year.

Dated, weather-based

Tomorrow's forecast

Tomorrow's value is a weather-based estimate for Tuesday, September 1, 2026: 39.3 kWh from the 10 kWp reference system, with a likely range of 26.2 kWh–50.6 kWh. It changes with the next weather forecast.

Multi-year climate baseline

PVGIS specific yield

Pilsen's PVGIS specific yield is about 1,067 kWh/kWp per year. It is a multi-year climate benchmark, not a prediction for tomorrow or for this calendar year. In the PVGIS profile, July is typically the strongest month and December the weakest.

3, 5 and 10 kWp reference systems

Scale the same assumptions to your system size

SystemTomorrow estimate (likely range)PVGIS typical year
3 kWpTomorrow estimate (likely range)11.8 kWh7.9 kWh–15.2 kWhPVGIS typical year3,202 kWh/year
5 kWpTomorrow estimate (likely range)19.6 kWh13.1 kWh–25.3 kWhPVGIS typical year5,337 kWh/year
10 kWpTomorrow estimate (likely range)39.3 kWh26.2 kWh–50.6 kWhPVGIS typical year10,674 kWh/year

Linear reference scaling only: south-facing, 35° tilt and 14% system losses. It does not resize inverter clipping, shade or local roof constraints.

From forecast to a household plan

Battery, EV, heat pump and flexible loads

Treat the forecast as a gross solar-energy budget before household base load and conversion losses. The numbers support scheduling; they do not guarantee surplus.

Battery

Keep room for the solar window

Use 12:00-16:00 as the first candidate charging window. Battery state of charge, reserve settings and inverter limits still decide how much can be stored.

Heat pump

Shift only flexible thermal demand

If comfort controls allow it, place discretionary hot-water heating or pre-heating inside 12:00-16:00. Never override frost protection, hygiene cycles or manufacturer limits.

Large loads

Avoid stacking appliances

A 3 kWp system scales to about 11.8 kWh for the day before household use. Run flexible loads sequentially during the strongest hours rather than assuming all forecast energy is simultaneous power.

Local questions

Solar forecast FAQ

How much could a 5 kWp solar system produce tomorrow in Pilsen?

Using the same south-facing, 35-degree and 14% loss assumptions, the 5 kWp estimate is 19.6 kWh for Tuesday, September 1, 2026, with a scaled likely range of 13.1 kWh–25.3 kWh. This is a linear reference-system estimate, not a site survey.

What does 1,067 kWh/kWp mean for Pilsen?

It means the PVGIS multi-year profile produces about 1,067 kWh in a typical year for each installed kWp under the reference assumptions. A 5 kWp system therefore scales to about 5,337 kWh in a typical year before site-specific adjustments.

Is the Pilsen forecast the same as the PVGIS annual estimate?

No. Tomorrow's forecast uses dated weather and an uncertainty band for one day. The PVGIS figure is a multi-year climate-based specific yield used for typical monthly and annual comparisons.

When should a battery, EV or heat pump use solar in Pilsen?

Start with 12:00-16:00, then check household base load, battery headroom, EV energy required and heat-pump safety or comfort constraints. The forecast estimates daily energy, not guaranteed instantaneous surplus.

Typical year

Solar production month by month in Pilsen

A standard 10 kWp system produces about 10,674 kWh in a typical year at this location. Monthly averages show seasonality; they are not a forecast for a specific year.

Values are kWh per month. Source: European Commission JRC PVGIS.

What makes Pilsen's solar profile different?The typical annual yield is about 1,067 kWh per installed kWp, ranking Pilsen #4 of 6 modelled locations in Czechia. That is 1% below the median of the 6 Czechia locations in this dataset. July is typically the strongest month and December the weakest; the stronger month produces about 4.0 times as much.

See the 12-month data
MonthMonthly outputDaily averageYear-to-year variation
MonthJanuaryMonthly output352 kWhDaily average11.3 kWh/dayYear-to-year variation±73 kWh
MonthFebruaryMonthly output585 kWhDaily average20.9 kWh/dayYear-to-year variation±130 kWh
MonthMarchMonthly output924 kWhDaily average29.8 kWh/dayYear-to-year variation±184 kWh
MonthAprilMonthly output1,197 kWhDaily average39.9 kWh/dayYear-to-year variation±192 kWh
MonthMayMonthly output1,272 kWhDaily average41.0 kWh/dayYear-to-year variation±179 kWh
MonthJuneMonthly output1,301 kWhDaily average43.4 kWh/dayYear-to-year variation±121 kWh
MonthJulyMonthly output1,321 kWhDaily average42.6 kWh/dayYear-to-year variation±126 kWh
MonthAugustMonthly output1,233 kWhDaily average39.8 kWh/dayYear-to-year variation±127 kWh
MonthSeptemberMonthly output1,035 kWhDaily average34.5 kWh/dayYear-to-year variation±149 kWh
MonthOctoberMonthly output738 kWhDaily average23.8 kWh/dayYear-to-year variation±132 kWh
MonthNovemberMonthly output389 kWhDaily average13.0 kWh/dayYear-to-year variation±60 kWh
MonthDecemberMonthly output327 kWhDaily average10.5 kWh/dayYear-to-year variation±61 kWh

Nearby solar forecasts

Compare Pilsen with nearby cities

Tomorrow, in one email

Get Pilsen's solar forecast by email

Tomorrow's expected production, likely range and strongest hours. One useful email each day.

Daily email only. Analytics is optional. Unsubscribe in one click.Privacy

Method and data

Every city uses a 10 kWp system facing south at 35 degrees with 14% system losses. Tomorrow's figure combines hourly weather with GridPassport's PV production and uncertainty model. The monthly profile uses the European Commission JRC PVGIS multi-year climate series. Roof direction, shade, snow, dirt, inverter clipping and local weather can change real output.

CSV and JSON snapshots are published under CC BY 4.0 with source attribution.